Updated by Ryan Gray
The process for changing an EBSP200 PID from Farenheight or Celsius to the opposite is as follows:
- Press SET and < at the same time, PASS will appear
- Enter 0101 and press SET, INPT will appear
- Press SET until you see UNIT
- Pressing the UP/F2 or DOWN/F1 keys, you can change from F to C or C to F depending on your desired unit.
- Press SET again to save
- Then press SET and < to return the Present and Set value display.
Panels assembled will typically ship setup for Farenheight but PIDs shipped as parts will ship in Celsius.
Check out the following video for demonstration: