Electric Brewing Supply 360 Control
360 Series Firmware Update
Electric Brewing Supply's 360 series controllers are based on Horner Automations' Micro OCS Series (X Line) controllers, X4, X7, and X10s. Every few months Horner does provide a firmware update, this…
Automatic Start Control
For those that need the convenience of an HLT shut down when they aren't brewing but would like it to begin heating over night, prior to a brew day; we have implemented an auto start function. Set th…
Local Fermentation Feature
Congratulations on your choice of the 360 series controller. With the advent of revisions starting November 1, 2019; most if not all main brew control panels (excludes Nano Electric) will have capaci…
Meet your new control screen - Main Screen
The 360 Series touch control panel is a convenient and powerful touch control unit with many features built in to extend as much functionality as we can to you in one controller. This means we includ…
Setting up the 360 network address
First step in setting up your new 360 controller for its web page interface function is to setup the network address on your controller. In order to setup the address, you will need to learn some det…
Step Mash Control feature
One of the handiest features found on our 360 series controllers is the step mash function and control. What this means is you can set a mash schedule up prior to brewing and let the computer take ov…
Updating your 360 Control Software
Before updating, insure you have firmware version 15.20 as a minimum. To do this confirm by the following steps: Tap the top right corner of your controller. You'll see a menu appear. Select System.…
VFD Control Setup
If you purchased a 360 series brewhouse controller, and either added VFD at the time of order, or purchased later on; the setup steps will be the same. We have pre-configured all panels with version…
